Archive

Posts Tagged ‘VX-402R’

Outdoor Motion Sensor With ADT Pulse

February 16, 2013 9 comments

ADT Pulse requires an “event” to trigger a recording.  Some of the cameras compatible with the system can record detected motion to a DVR.  These cameras will not record to the ADT Pulse system with the same detected motion stimulus.  With the Pulse system the user has to base recordings on a triggering event.

An example of a trigger could be a door opening, light coming on, an alarm event or motion detection via a security motion sensor (not camera).  When I first obtained my ADT Pulse system, I was somewhat disappointed to discover I could not record video of people who came to my door when I was not home.  The solution seemed obvious, create a “trigger” based on a tripped motion sensor by the door.  The problem, ADT Pulse did not offer or support outdoor motion sensors with any of the Pulse packages.  ADT may offer outdoor sensors independently of the ADT Pulse system.  Unless already have an outdoor sensor or request one installed with your ADT Pulse there is NO ADT pulse package that will enable you to record events outside your home, based on motion.

A motion detector is technically a security module.  Triggers and alerts can be created for any motion detector that is part of your security system.  In my case, the security panel is a Concord 4.  The Concord 4 panel integrates with the ADT Pulse IHub to present the end user with an integrated security/home control system.   Any module that is supported and controlled by your security panel is observable and manageable through the ADT Pulse interface (web portal or touchscreen).  While ADT Pulse does not come with an outdoor motion detector module, the Concord 4 panel does support this type of motion sensor.    Any outdoor motion sensor that is part of a Pulse compatible security system should work with ADT Pulse.

VX-402R

 

The VX-402R is a heavy duty, outdoor motion detector that utilizes a variety of transmitters.  For my solution I used the Caddx NX-650.  Joining a VX-402R to the Concord 4 panel requires the user to join the module via shortcut option on the security keypad or utilizing the installer code.

Once the outdoor motion detector is installed, the user can set up automations based on motion, via the ADT Pulse web portal.  Most security panels support some sort of outdoor motion sensor.  Make sure the sensor you choose is compatible with your security panel.   This may seem obvious to some.  I get about one email a month asking how to set this up.  Hopefully, this blog post will help end users tweak their own system.  Good luck.

%d bloggers like this: